Expert Advice for your Lawn & Garden TV Host of Today's Homeowner^® and home expert for The Weather Channel

Thomas asks, “I put polyurethane on cabinets after I stained them. Now a week later, I find oil on the surface of the cabinets, and when I try to clean it, it leaves dull spots. I don’t know what to do, or what is the problem. H-E-E-E-E-L-P!!!”

This small room is perfect for a piece of low pile commercial carpet we picked up for $100. Start by aligning the factory cut edges of the carpet against two of the adjoining walls in the room. Press the carpet firmly against the remaining walls with a 6” drywall knife, then cut through it using a sharp utility knife.

Linda asks, “Can I lay ceramic tile over vinyl tile in my kitchen? I really don’t want to pull up the vinyl.” We receive more questions about tiling over an existing floor than any other. It seems like everyone wants to know what to do when they replace the floor in their kitchen or bath.

More and more materials for countertops and floors are available that are both beautiful and environmentally friendly. One product called shetkaSTONE is made from recycled paper, plant, and cloth fibers. While it has the look of stone, it can be cut and screwed like wood. It is water and stain resistant and comes in a number of colors. Best of all shetkaSTONE can be recycled again if it is ever replaced.

Nowhere is the charm of an older home more apparent than in the rich look of heart pine floors. Cut from the dense heartwood near the center of virgin longleaf pine trees, heart pine is prized for its fine grain, durability, and lasting beauty.

James asks, “I currently have a dated ceramic bathroom tile floor originally installed over a cement and mortar base. The ceramic tiles are about 6 inch square with a matte finish and about 1/4″ thick with 1/4″ sanded grouting. Is it possible to tile on top of the existing tiles with thin set mortar? If so, are there any preparations to the existing tiles required? Your advice would be appreciated.”

If you’re under the impression that environmentally friendly flooring products, such as bamboo and cork, are little more than the latest fad that will soon disappear, then think again. Though very different from each other, both are high quality products that make beautiful and durable floors. In addition, bamboo and cork are easy to install and cost about the same as traditional hardwood.

The bath we are renovating is about 50 years old and measures only 4’ wide by 9’ long. With the exception of the shower, all of the fixtures will be replaced and a vent fan mounted in the ceiling. While many of the items we used were available on the shelf at the home center, we were able to special order hard to find items from their catalog.

Danny takes a look at the Uponor radiant flooring system installed during Today’s Addition. He talks with the installer, Wes Sisco to see how it was installed. Wes demonstrates how the system known as Quick Trak® works. ½” plywood with a heat emission plate on one side and a dovetail groove on the other is installed under pre-finished hardwood. 5/16” plastic PEX tubing fits in the groove and conducts to the heat emission plate distributing heat across the floor.